Vinyl Letters for Windows, Walls and Boats
- High Quality Outdoor/Indoor
- 3 mil Professional Vinyl
- 6 mil Reflective Vinyl
- 3.5 Reflective Vinyl
- Ships in 4 Business Days
after proof is approved - 100+ Standard Styles
- 20 Standard Colors
- Sharp Clean Lines
- Custom Logos & Colors Available
Questions? Call us!
1-877-704-5170
Vinyl Colors
Vinyl Mounting
1) Clean surface thoroughly
2) Apply masking tape along top edge. This will be used to hold the sign in place while you peel off the backing.
3) Level and apply tape to the wall.
4) Lightly spray surface with soapy water. This allows the sign to have some “play” when installing.
5) Lift up the sign allowing the masking tape to be the pivot point. Peel off the backing sheet slowly.
6) Slowly lower the letters to the wall. Squeegee every inch of the sign thoroughly making sure to get any excess water out from behind the letters. Let dry for a couple minutes.
7) Slowly peel off the face paper. Squeegee down the letters as needed. If letters stick to the backing re-squeegee the entire sign and let it dry some more.